Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Choose from 4 sizes and a variety of Polyform colors.
Features
- Even wall thickness for maximum strength and durability
- Molded -in ribs for strength and abrasion resistance
- Reinforced tube ends
- Designed for medium - duty use in both permanent protected and unprotected moorings
- Unique Polyform valve for years of service
Model | Size (diameter x length) | Eye Diameter | Circumference | Volume | Boat Size
HTM-1 | 16 x 39.4 cm | 1.6 cm | 50.3 cm | 6.8 ltr | 6.1 - 7.6 m
HTM-1 | 6.3 x 15.5 in | 0.625 in | 19.8 in | 1.8 gal | 20 - 25'
Model | Size (diameter x length) | Eye Diameter | Circumference | Volume | Boat Size
HTM-2 | 21.6 x 52.1 cm | 1.6 cm | 67.8 cm | 17.8 ltr | 7.6 - 9.1 m
HTM-2 | 8.5 x 20.5 in | 0.625 in | 26.7 in | 4.7 gal | 25 - 30'
Model | Size (diameter x length) | Eye Diameter | Circumference | Volume | Boat Size
HTM-3 | 26.7 x 68.6 cm | 1.6 cm | 83.8 cm | 34.8 ltr | 9.1 - 12.2 m
HTM-3 | 10.5 x 27 in | 0.625 in | 33 in | 9.2 gal | 30 - 40'
Model | Size (diameter x length) | Eye Diameter | Circumference | Volume | Boat Size
HTM-4 | 34.3 x 88.4 cm | 1.6 cm | 107.7 cm | 59.1 ltr | 12.2 - 15.2 m
HTM-4 | 13.5 x 34.8 in | 0.625 in | 42.4 in | 15.6 gal | 40 - 50'
IMAGES OF ACTUAL COLORS MAY VARY
