Interlux BilgeKote - Grey

Bilgekote® is a fast drying, durable coating formulated for application to bilge areas. Bilgekote® helps prevent absorption of oil, gasoline or sludge into wood and fiberglass.
Hard wearing coating for bilges and bulkheads
Chemical resistance to fumes, fuel and oil
High opacity for thorough coverage
Cleans easily for reduced upkeep

Technical Specifications
Area: Bilge Area
Finish/Sheen: Semi Gloss
Pack sizes: 1 US Quart, 1 US Gallon
Suitable for aluminum
Suitable for high fouling areas

Application:
Apply 2-3 coats of Bilgekote following the proper dry times. Sand between coats using 220-320 grade (grit) paper. Remove sanding residue. Bilgekote may be applied by roller and brush using the roll and tip method. Bilgekote may also be applied by spray.

Thinner Brush - Brushing Liquid 333. Spray - Special Thinner 216.
Thinning Thin if necessary with Brushing Liquid 333 to improve brushing characteristics. For spray application use
Special Thinner 216. Thin no more than 10%.
Cleaner Brushing Liquid 333 or Special Thinner 216.
Ventilation and Humidity Control
It is best to paint on warm, dry mornings. Cold weather retards the drying and humidity can spoil the gloss.