Strataglass™ Protective Cleaner #301

With UV protection to enhance flexibility and an anti-static formulation to help repel dirt from the surface this product can be used daily, removing finger prints and other dirt to keep clear vinyl shining like new. (Use in between applications of IMAR #302)

 

Cleaning Instructions for Clear Vinyl Products

1. Wash the surface of your clear vinyl. For boat enclosures and other outside locations like patio enclosures use our IMAR yacht Soap (#401). This product can be used on your entire boat. It is a gentle soap that will not strip wax or polish. If your clear vinyl is being used indoors, use a wet cotton or microfiber towel to wipe away any surface dirt before applying polish.

 

2. Protect surface with IMAR Strataglass Protective Polish (#302). Once the surface is clean and dry, apply a light coat of IMAR stataglass polish. Apply only enough to lightly coat the surface. Allow the ppolish to dry completely then buff the surface clean. (Always use soft cotton or microfiber towels on the surface of clear vinyl)

 

3. Keep clear vinyl looking glossy and new with IMAR strataglass protective cleaner (#301). Use on a daily basis as needed. Simply spay onto the clear vinyl and buff dry. This product, like the polish, will molecularly bond with the surface of the clear vinyl to protect it frm enironmental hazards helping to extend the amount of time needed between polishing; removing finderprints, repelling dirt and leaving a glossy look to the clear vinyl. Note: fingerprints can cause a permenant cloudy mark to occur on clear vinyl - especially if you have suncreen or lotions on your hands. Use the #301 anytime you think someone might have toched the clear vinyl to avoid this from happening.

 

IMAR clear vinyl products are exclusively endorsed by strataglass inc. for the care and mainetenance of their premium strataglass clear vinyl. Our products will also provide amazing results for all clear vinyl.