This is the highest output LED tower cluster available for marine use. It uses 18 surface mount cool-white (SMD) LEDs arrayed in 6 planes for 360° visibility. Proprietary PWM Constant-Current chipset results in high performance across the entire 10-30VDC range. This LED bulb product is ideal for masthead (anchor light) and stern lamp applications in fixtures that use a BAY15d bulb (double contact, offset pins).
Fits Aqua Signal Series 40, 41, 42 and 50, as well as Hella 2984 and Perko 200 Fixtures (clear lens fixtures only).
Replaces Aqua Signal bulb #90005, Hella bulb #78290 and Perko bulb #037512V10W.
Cool White is recommended behind clear lenses because it has a higher luminous output than Warm White. Because LEDs have a narrow spectrum, we don't recommend using Cool White behind colored lenses, as the colors will not be true. For use behind colored (e.g., red, green, bi-color, tri-color) lenses please see our warm white version ILTW1157-SMW
Features & Benefits:
- High output SMD LEDs
- Exceeds COLREG 3nm visibility requirements
- Meets visibility requirements for vessels up to 20m
- Constant-current drive topology Over-voltage protection
- Thermally efficient design
- Fits Socket BAY15d (double contact, offset pins)
- Typical Applications Masthead, stern light
- Dimensions (Diam. x H) 0.87 in. (22.1mm) x 2.14 in. (54.4mm) incl. base
- Input Voltage 10-30VDC
- Current Draw 250maA/12V 125mA/24V
- LED Emitting Color Cool White
- LED Type/Quantity 18 x SMD
- Beam Angle (FWHM) 120º (five directions) 360º pattern
- Halogen Equivalency 10W
- Warranty 2 Years
Important Notice: Navigation lights are tested and approved as a fixture with the original equipment source (bulb) already installed. The operator of vessel assumes all liability when using this product as a replacement for the original approved light source. The use of this LED light source in individual navigation fixtures has not been evaluated for compliance to USCG, COLREG, or any other navigational lighting standards or regulations.
